In Search of the Holy Grail: the Elusive DEW Frequency

In Search of the Holy Grail: the Elusive DEW Frequency

Jay Coin | Medium | Source URL

For background, I have been targeted with DEW for the last four years. My body has steadily worn down until I began using electromagnetic shielding, mainly lead rubber products, six months ago. I aim to find the frequency of DEW so the TI community can better understand, in scientific terms, what we are dealing with. I hope this study encourages others to collect solid scientific evidence of this crime, further research this area, and use the frequency findings to better measure and shield against DEW.

I will provide here a TL;DR of this article (which you may also consider a spoiler so skip ahead if you don’t want to see the net takeaways):

  • An industrial Radio Frequency (RF) meter reveals that the majority of DEW frequency is between 6 GHZ and 50 GHZ. This is hidden to most ordinary people because EMF meters available to the public typically max out at 6 GHZ so they lack visibility into the bulk of DEW frequency readings.
  • Using an industrial RF meter, TI’s can see that the cumulative Microwave frequency they are exposed to through DEW is scientifically abnormal and deviates massively from ordinary levels; in my tests I routinely saw RF peaks of 100–200 mW/m2. This represents orders of magnitude beyond what radiation experts consider ‘normal’ in the home and upto 50x higher than allowable FCC limits. A non-industrial RF meter would have missed ~90% of this value. With industrial meters, definitive scientific proof of EMF abnormalities caused by DEW is more achievable.
  • Based on my Faraday Tent test with the industrial RF meter, there is reason to believe a portion of the DEW frequency may be north of 25 GHz (25 to 50 GHz).

In this article I will cover:

  • Finding Frequencies: the device I used for measuring DEW
  • What is the Dew Frequency?: my test readings
  • What is Normal?: what are normal RF readings in a home (and how do they compare to the RF readings I found as a TI suffering from DEW)
  • Faraday Tent Test: I dig deeper into the range of DEW frequency by testing the meters inside and outside a Faraday tent

Finding Frequencies

Let me go back to beginning of my pursuit of the DEW frequency. In December 2017, I was hit with a strong microwave auditory attack (similar to the one against US diplomats in Cuba). In response, I purchased a Trified EMF Meterwhich measures Radiofrequency (RF) between 20 MHz — 6 GHz. Microwave-frequency induced noise is caused by the Frey effect; which occurs between 200 MHz to 3 GHz — so the Trifield meter would work well for this — it encompasses that range. The Trifield let me see with my own eyes that when I was hit with this microwave noise, the EMF RF readings jumpedbecause it was capturing the frequency range of this particular EMF attack. My peak RF readings would increase 10–100x when I would hear the microwave induced noise!

While I was able to measure accurately the frequency of the microwave auditory attack, I also wanted to pin down the frequency range of the Directed Energy Weapons (DEW) used against TI’s. DEW wears away at the body. It can be “overt” with a zapping pain or it can be “subtle“ where microwave exposure damages muscle tissue, causing mitochondrial damage, etc. but the subject doesn’t feel pain; he or she does feel the body wear down over time though, however.

Unlike the Microwave Auditory Effect (Frey Effect), there is very little public research or information about DEW frequency range. So I sought to find out myself. As mentioned I’ve been hit with DEW for four years; it’s very clear my body pain and fatigue is caused by external microwave frequency because when I use lead shielding, my body recovers. When I don’t have the shielding, my body deteriorates.

So how could I begin to generate data points that would lead me to DEW frequency? One of the challenges a TI faces in confronting this question is that most RF meters sold to the public ONLY measure upto 6 GHz. The reason is that most common problematic RF frequencies are caused by appliances, wifi, and cellular phones — and these typically max out at 5 GHz. For example, WiFi typically functions at 2.4 and 5 GHz. Cellular 3G is between 800 MHz and 1.9 GHz. Cellular 4G ranges from 700 MHz to 2.9 GHz. These publicly available RF meters are meant for common use- and the most common sources of RF frequency, as you can see, are under 6 GHz. These products are not made for TIs and to measure DEW.

There are industrial RF meters that you can buy with probes that measure frequency beyond 6 GHz. The problem is they are pricey. The Narda NBM 550 can measure upto 60 GHz (from 100 kHz). The only thing? A new device along with the probes you will need can set you back $20,000 to $30,000 — out of the range of most TI’sHere is a pre-owned device on EBay that costs $9,500.

To solve this impasse, I decided to rent the device from one of the many companies that rent industrial equipment. The total cost to me was ~$850 to rent the device and probes for one month. The device is the Narda NBM 550 and the probe I rented was NARD-EF5091 (300MHz-50GHz E Field (Flat) Probe for NBM Series, 8–614V/m).

A few days later the package arrived. Device in hand, I began to measure a much wider range of frequency than was possible with typical EMF meters. (During these tests, I turned my Wifi and cellular phone off). So what did I find?

Using an Industrial RF Meter and Initial Findings on What Exactly the DEW Frequency Is

So let’s begin with the findings. The First Key Finding is that it’s very clear that TI’s targeted with DEW are being hit with frequencies above 6 GHz as well; in fact the majority of DEW frequency appears to be north of 6 GHz.

Quick Primer on Frequency Readings: Before I get to the measurements, there are two dimensions to the frequency readings that I want to make clear and distinguish. First is the frequency or frequency range. A frequency range can be: 1 GHz to 6 GHz, for example. The second is the reading — which tells us the volume of frequency we are being exposed to (“how much”). The reading for RF is often measured in mW/m2. This refers to milliwatts by square meter. For the reader’s purpose, just think of the reading as lower is less and higher is more (more frequency exposure). So the Trifield meter’s frequency range is 20 MHz to 6 GHz. And when I use that meter, I will see a reading on its display, saying for example 1.5 mW/m2. What the Trifield is doing is looking at the volume of frequency everywhere between 20 MHz and 6 GHz, adds them up, and comes to a cumulative reading value (in this case 1.5 mW/m2). There is 1.5 mW/m2 of frequency exposure in the 20 MHz-6 GHz range. Hope that makes sense and makes understanding my writeup easier.

Before I get to the measurements, let me get one technicality out of the way. The Trifield meter measures RF in mW/m2 . The Narda NBM 550 measures RF in W/m2. mW is milliwatts and it represents 1/1000th of a watt. W represents one watt. So when I make comparisons, to keep things simple, I will reflect the values of both as mW/m2 so we can make easier apples-to-apples comparisons (all this requires is multiplying the Narda reading by 1,000).

What I am aiming to gauge is how much DEW frequency falls between 0–6 GHz (which I will refer to in this article as “lower RF frequency range”) and 6–50 GHz (which I will refer to in this article as “higher RF frequency range”).

So here is how I am determining what DEW frequency falls into the higher RF frequency range (6–50 GHz). I am using both my Trifield and Narda meters simultaneously. Trifield measures upto 6 GHz. Narda measures upto 50 GHz. I take the readings from both and then subtract the Trifield meeting from the Narda reading. So:

(Narda reading) minus (Trifield reading) = The Cumulative Reading of Frequency in the Higher RF Frequency Range (6–50 GHz)

The Narda reading will be higher because it includes everything in the Trifield reading PLUS RF frequency readings between 6 GHz and 50 GHz as well.

Let me say here that my readings show EMF levels well above ordinary. In normal environments, the Trifield (0–6 GHz) RF peak reading would be under 0.1 mW/m2. There is also no reason to have significant levels of RF frequency above 6 GHz (6–50 GHz) in a civilian environment such as mine. So I’m making an educated guess most of my RF readings represent ‘excess’ and reflect DEW frequency — as these readings are well above 0.1 mW/m2. (I talk more about “normal” levels in the section below “What is Normal?”)

I should note I’m being hit with DEW constantly and so these readings should reflect the EMF abnormalities generated by such attacks.

So let’s begin with my readings. Here is one reading :

Date: October 30, 2018

Time: 6:21 PM

Trifield peak reading: 1.1 mW/m2

Narda peak reading: 15.6 mW/m2

Higher RF Frequency Range total (6–50 GHz) : 14.5 mW/m2.

So approximately 93% of the DEW EMF is coming from the higher RF frequency range (6–50 GHz).

Here is another reading:

Date: October 30, 2018

Time: 6:41 PM

Trifield peak reading: 1.3 mW/m2

Narda peak reading: 10 mW/m2

Higher RF Frequency Range total (6–50 GHz): 8.7 mW/m2.

Here 87% of the DEW EMF is coming from the higher RF frequency range (6–50 GHz).

The are more readings like this. In repeated readings, I find that the higher RF range (6–50 GHz) makes up 60–95% of the total frequency readings.Based on these repeated readings, I have a high degree of confidence that DEW is likely between 6 and 50 GHz and not in the lower radiofrequency range like Microwave Auditory attacks are (which are typically 1 to 3 GHz). (I should also add here that I have not tested frequency above 50 GHz and there is a possibility that DEW frequency is over 50 GHz as well or primarily).

Second Key Finding: Industrial EMF meters reveal that TI’s are subject to Much Higher Microwave Exposure than One Might Think if using an ordinary EMF meter

During the DEW attacks, I routinely see peak RF readings of 100–200 mW/m2 with the Narda NBM-550, especially in my bedroom where I am targeted most commonly. As I’ll explain in the next section (“What is Normal?”), this is highly abnormal for a residence and I believe this kind of data collection takes TI’s towards concrete, indisputable scientific proof that they are targeted with directed energy. These levels are ~1,000 times higher than what radiation specialists consider problematic.

Two important things here. First, without access to this ~$25,000 device, most TI’s only capture a small percentage of DEW frequency. As mentioned 90% of these readings are in the High RF Frequency range that ordinary EMF meters don’t capture. So it’s possible TI’s went to authorities or courts with radiofrequency readings that seemed abnormal, but not high enough to be indisputably problematic. There is a difference in showing one is subject to 100 mW/m2 RF frequency versus 10 mW/m2.

Industrial meters like Narda capture the fuller picture, and reveal more accurate readings which show TI microwave exposure is 10x higher than previously thoughtNow TI’s have more complete, accurate data with which to present their case. If you are a TI with a Trifield meter, or a Cornet meter, etc. and see abnormal readings like occasional peak readings of 1–10 mW/m2 (while controlling for wifi/cellular while testing), your actual exposure may be significantly higher than that– which could explain your symptoms. (See the UCSD/Golomb study for how microwave exposure explains a vast array of physical symptoms)

Second, there is less noise-to-signal to this industrial EMF reading number. Since 90% of frequency falls into the High RF Frequency Range (6–50 GHz), there is far less ambiguity or reason to doubt these abnormally high levelsThat’s because in that high range, Wifi and cellular cannot be used as a reason by critics to suggest the reading is inflated due to ordinary household electronic communications. This is because those electronics do NOT operate in the High RF Frequency range. There is clearly some unusual cause of these high readings TI’s are finding and now it cannot be argued away by claiming ordinary household electronics are that cause. (even though TI’s turn off Wifi and cellular when doing these tests, critics can still claim that’s a cause; or claim nearby use of cellular and wifi is a cause). Even if those ordinary electronics contribute to the reading, they only impact that 10% ‘Low RF Frequency range”; the 0–6 GHz component of the overall number.

One of the reasons I rented the Narda device was to test my suspicion that DEW frequency went above the ranges that typical EMF RF meters cover. This encourages me to invest in a Spectrum Analyzer or Selective Radiation Meter to gauge the problematic DEW frequency or frequency range more precisely. But before I invested in that, I wanted to first use an industrial RF meter to first see what range of GHz frequency I would need the spectrum analyzer to cover. It’s clear now that I should get an analyzer that reaches up to 50 GHz if not higher.

What is Normal?

Patrick van der Burght (an authority on radiation assessment in homes, mitigation and radiation-free building support; and an international speaker on radiation measurementdescribes here that a 0.01 mW/m2 RF reading as ideal in the home and a 0.3 mW/m2 reading as potentially problematic likely requiring shielding. Now let’s come back to my findings of 100–200 mW/m2 of radio frequency exposure . Granted this was over a larger frequency range, but given that there are no common causes of high-frequency in homes (over 6 GHz), that is a worrisome level — and certainly abnormal & suspicious. This suggest a reading ~600x higher than a problematic level of radio frequency, as determined by an expert in the field.

The FCC puts out guidelines on maximum exposure of frequency (“Limits for Maximum Permissible Exposure (MPE) — from §1.1310”). According to their guidelines, the maximum exposure for frequencies between 1.5 GHz and 100 GHz is 5 mW/m2. As mentioned above, I often see Narda readings of 100–200 mW/m2 in this range (6 GHz-50 GHz). So this appears to be 2x to 40x higher than the FCC limit. When TI’s are hit with DEW, the amount of frequency they are exposed to, and can measure objectively and scientifically, clearly exceeds ordinary limits from ordinary household electronics and is in a range the government deems unhealthy.

One note: The FCC puts out other numbers for frequency levels below 1.5 GHz. These levels are conservatively high, ridiculously so, and are meant to protect against EXTREME overheating and electric shock. The reality is that health is impacted well under these levels. From SmartGrid Awareness:

“Bioeffects and adverse health impacts that have been measured “at very low [microwave] levels” based upon published studies from various emission sources…Various governmental RF exposure guidelines that do not fully protect public health. In particular, the guidelines for the USA and Canada were only established to protect tissues from significant overheating and electric shock.”

Read More

Leave a Reply

Your email address will not be published. Required fields are marked *